I've posted before regarding how to mount and access Volume Shadow Copies (VSCs), but I thought it might be useful to revisit this topic, as there's a great deal that you can do once you've mounted a VSC.
If you received/have an image acquired from a Vista or Win7 system, you'll likely want to mount the image and access data within the available VSCs at some point. Commercial tools such as ProDiscover provide access to the VSCs within an image (PDF here), but how can you access this source of data in a more economical fashion?
Well, there are a couple of ways to go about this, both of which require that you're using a version of Windows that supports VSCs, such as Windows 2008 or Windows 7.
VMDK Method
Starting with your image, download a copy of either raw2vmdk or LiveView and create a VMWare virtual disk (.vmdk) file for the image (I say "for" because the .vmdk file will most likely contain a reference to the image file). Once you've done this, you can add this .vmdk file as an additional hard drive to a VMWare virtual machine (VM), and then boot that VM. You can add a .vmdk file as an additional hard drive via VMPlayer, but if you have VMWare Workstation, you can add the .vmdk file as an independent, non-persistent disk, which means that no changes are made to the .vmdk file.
Note : You should always work on a copy of an image, not the original image file itself.
As a test, I opened VMPlayer running on a Windows 7 64-bit host system and selected a 32-bit Windows 2008 guest VM. I added a .vmdk file from a 32-bit Windows 7 guest VM to the Win2008 VM as an additional hard drive, and booted the Win2008 VM. Once I logged in, I was able to list the available VSCs from the Windows 7 .vmdk file (mounted as the E:\ volume) using the command vssadmin list shadows /for=e:. From that point, it was simply a matter of using the mklink command to mount a VSC.
VHD Method
To use this method, download a copy of vhdtool, and use it to convert the image to a VHD file (i.e., vhdtool /convert). The tool adds a VHD footer to the image file, so the extension of the image file won't change automatically, although that's not needed in order to mount the VHD file (you can change the extension manually, if you like). You can then use the Disk Management tool to add the VHD file to a Windows 2008 or Windows 7 system as a read-only disk.
What now?
Once you've mounted the image file, you can list the available VSCs using the vssadmin command, and even create a batch file that will mount each VSC using the mklink command, run various tools on the mounted VSC (i.e., rip.pl/.exe, LogParser, etc.), and then unmount each VSC using the rmdir or rd command.
I've used this method to cycle through the VSCs within an image from a Vista system to extract information from a user's UserAssist key using the userassist_tln.pl RegRipper plugin (via rip.pl), in order to determine not only the last time that the user launched an application, but previous times, as well.
Resources
This section provides links to blog posts from other analysts to demonstrate what they've done while having access to VSCs...
- Stacey Edwards' SANS Forensic Blog post on using LogParser against VSCs
If you received/have an image acquired from a Vista or Win7 system, you'll likely want to mount the image and access data within the available VSCs at some point. Commercial tools such as ProDiscover provide access to the VSCs within an image (PDF here), but how can you access this source of data in a more economical fashion?
Well, there are a couple of ways to go about this, both of which require that you're using a version of Windows that supports VSCs, such as Windows 2008 or Windows 7.
VMDK Method
Starting with your image, download a copy of either raw2vmdk or LiveView and create a VMWare virtual disk (.vmdk) file for the image (I say "for" because the .vmdk file will most likely contain a reference to the image file). Once you've done this, you can add this .vmdk file as an additional hard drive to a VMWare virtual machine (VM), and then boot that VM. You can add a .vmdk file as an additional hard drive via VMPlayer, but if you have VMWare Workstation, you can add the .vmdk file as an independent, non-persistent disk, which means that no changes are made to the .vmdk file.
Note : You should always work on a copy of an image, not the original image file itself.
As a test, I opened VMPlayer running on a Windows 7 64-bit host system and selected a 32-bit Windows 2008 guest VM. I added a .vmdk file from a 32-bit Windows 7 guest VM to the Win2008 VM as an additional hard drive, and booted the Win2008 VM. Once I logged in, I was able to list the available VSCs from the Windows 7 .vmdk file (mounted as the E:\ volume) using the command vssadmin list shadows /for=e:. From that point, it was simply a matter of using the mklink command to mount a VSC.
VHD Method
To use this method, download a copy of vhdtool, and use it to convert the image to a VHD file (i.e., vhdtool /convert). The tool adds a VHD footer to the image file, so the extension of the image file won't change automatically, although that's not needed in order to mount the VHD file (you can change the extension manually, if you like). You can then use the Disk Management tool to add the VHD file to a Windows 2008 or Windows 7 system as a read-only disk.
What now?
Once you've mounted the image file, you can list the available VSCs using the vssadmin command, and even create a batch file that will mount each VSC using the mklink command, run various tools on the mounted VSC (i.e., rip.pl/.exe, LogParser, etc.), and then unmount each VSC using the rmdir or rd command.
I've used this method to cycle through the VSCs within an image from a Vista system to extract information from a user's UserAssist key using the userassist_tln.pl RegRipper plugin (via rip.pl), in order to determine not only the last time that the user launched an application, but previous times, as well.
Resources
This section provides links to blog posts from other analysts to demonstrate what they've done while having access to VSCs...
- Stacey Edwards' SANS Forensic Blog post on using LogParser against VSCs
轉自 http://windowsir.blogspot.com/2011/09/howto-mount-and-access-vscs.html
發表文章
0 意見: